PCN NDT TRAINING AND CERTIFICATION
- MAGNETIC PARTICLE TESTING (MT)
- ULTRASONIC TESTING (UT)
- PHASED ARRAY ULTRASONIC TESTING
- PENETRANT TESTING (PT)
- TIME OF FLIGHT DIFFRACTION ULTRASONIC TESTING
- BASIC RADIATION SAFETY
- RADIOGRAPHIC FILM INTERPRETATION (WELDS)
MAGNETIC PARTICLE TESTING (MT)
Course Content
Principles of magnetism; magnetic fields; induction; permeability and reluctance; magnetisation; lines of force, methods of testing, viewing conditions, detecting media; interpretation and evaluation, acceptance levels; demagnetisation; practical exercises; methods of assessing sensitivity, reporting; instruction writing.
Course Duration : 5 days
Course Objectives:
- To explain the basic principles of magnetic particle inspection methods
- To carry out magnetic particle inspection
- To write clear and concise inspection instructions and test reports
- To meet syllabus requirements for PCN Level 2
Certification / Awarding Body
Entry Requirements (For Examination)
The minimum requried duration of training, which includes both theoretical and practical elements, is : Level 2 - 40 hours
The minimum duration for experience prior to or following success in the qualification examination is : Level 2 - 4 Months
ULTRASONIC TESTING (UT)
Course Content
Basic principles of sound; generation and detection of sound; behaviour of sound in a material, factors affecting propagation of sound; the flaw detector, calibration blocks/DAC blocks; use of angled beam probes for weld scanning, calibration of equipments; welding processes and weld defects; practical exercises on test specimens containing simulated flaws; examination of parent plate, butt welds, interpretation and evaluation; instruction writing.
Course Duration : 12 days
Course Objectives:
- To explain the theoretical background of the techniques
- To calibrate ultrasonic equipment
- To measure the thickness of steel plates and determine levels of attenuation
- To locate and evaluate laminations
- To select the correct type of probe to examine welded butt joints in steel plate/pipes
- To report on the location and size of defects in typical welded butt joints
- To interpret code requirements
- To meet the syllabus requirements for PCN Level 2.
Certification / Awarding Body
Entry Requirements (For Examination)
The minimum required duration of training, which includes both theoretical and practical elements, is: : Level 2 - 120 hours
The minimum duration for experience prior to or following success in the qualification examination is : Level 2 - 12 Months
PHASED ARRAY ULTRASONIC TESTING (PAUT) OF WELDS
Course Content
Introduction in PAUT, Basic Principals of PAUT, Basic components of PAUT, PAUT Probe Characteristics, Types of PAUT Probes, Beam Shaping & Steering Dynamic Depth Forms, Digitization Principles, Types of Scans, PAUT machine familiarization, Development of Scan Plan, Data acquisition, Data Interpretation etc.
Course Duration : 12 days
Course Objectives:
- To explain the theoretical background of the techniques
- To explain the theoretical background of the techniques & the PAUT machine characteristics
- To calibrate PAUT equipment (velocity, Wedge delay, Sensivity, Encoder)
- To Scan the plates and acquire the data
- To locate and evaluate defects using PAUT
- To select the correct type of probe/ machine parameters to examine welded butt joints in steel plate
- To report on the location and size of defects in typical welded butt joints
- To interpret code requirements
- To meet the syllabus requirements for PCN Level 2
Certification / Awarding Body
Entry Requirements (For Examination)
The minimum required duration of training, which includes both theoretical and practical elements, is: : Level 2 - 120 hours
The minimum duration for experience prior to or following success in the qualification examination is : Level 2 - 12 Months
PENETRANT TESTING (PT)
Course Content
Materials, methods, compatibility of materials, application of materials, process of carrying out penetrant testing, viewing conditions, equipment requirement, equipment and safety aspects; practical exercises; methods of assessing sensitivity, intepretation and evaluation, reporting, instruction writing.
Course Duration : 5 days
Course Objectives:
- To explain the basic principles of penetrant inspection methods
- To carry out penetrant inspection using solvent-removable, water-washable and post-emulsifiable/removal processes
- To write clear and concise inspection instructions and test reports
- To meet syllabus requirements for PCN Level 2
Certification / Awarding Body
Entry Requirements (For Examination)
The minimum required duration of training, which includes both theoretical and practical elements, is: : Level 2 - 40 hours
The minimum duration for experience prior to or following success in the qualification examination is : Level 2 - 4 Months
TIME OF FLIGHT DIFFRACTION ULTRASONIC TESTING
Course Content
History of TOFD Development, TOFD Advantages and Limitations, Principles of TOFD, Principles of TOFD, Depth Calculation, Time Calculation, PCS Calculation, Types of TOFD Scan, Equipment Used In TOFD, Digitalization Principles, Equipment Requirements, TOFD Depth, Ring-Time Issues And Errors, Interpretation and Evaluation, Applications
Course Duration : 12 days
Course Objectives:
- To explain the theoretical background of the techniques & the TOFD machine characteristics
- To calibrate TOFD equipment (velocity, Wedge delay, Sensitivity, Encoder)
- To Scan the plates and acquire the data
- To locate and evaluate defects using TOFD
- To select the correct type of probe/ machine parameters to examine welded butt joints in steel plate
- To report on the location and size of defects in typical welded butt joints
- To interpret code requirements
- To meet the syllabus requirements for PCN Level 2
Certification / Awarding Body
Entry Requirements (For Examination)
The minimum required duration of training, which includes both theoretical and practical elements, is: : Level 2 - 120 hours
The minimum duration for experience prior to or following success in the qualification examination is : Level 2 - 12 Months
BASIC RADIATION SAFETY
Course Content
Source and nature of ionising radiation; relevant basic physics; behaviour of radioactive isotopes; absorption processes; units of activity and dose; radiation damage to the human body; somatic and hereditary damage; stochastic and deterministic effects; early and late effects; principles of radiation protection; methods of radiation protection (time, distance, shielding); dose limits; safe distance and other protection calculations; gamma containers and tests on them; packaging, labelling and transport; instrumentation and monitoring; emergency procedures and equipment; Radiation Protection Supervisor will also include the requirements for Radiation Protection Supervisors; knowledge and understanding of the requirements to assess doses; carry out hazard assessments; implement contingency plans and emergency procedures; arrangements for the provision of dosemeters and the keeping of dose records.
Certification / Awarding Body
Course Duration :
The minimum required duration of training, which includes both theoretical and practical elements, is:
Course Objectives:
- To list basic hazards and harmful effects relating to exposure to radiation
- To calculate/evaluate safe distances and check dose levels
- To explain effective uses of shielding and distance
- To devise and execute contingency arrangements
- To learn emergency procedures
- To meet syllabus requirements for PCN
Entry Requirements (For Examination)
The minimum duration for experience prior to or following success in the qualification examination is:
RADIOGRAPHIC FILM INTERPRETATION (WELDS)
Course Content
Welding processes and weld defects; properties of X- and gamma-rays; sensitometry; film selection; film processing and spurious indications; factors controlling contrast and definition; X- and gamma-ray equipment; ionising radiation hazards; regulations; use of screens and filters; selection of angle of aspect; image quality indicators; defect depth location; castings; reporting.
Certification / Awarding Body
Course Objectives:
- To list radiographic techniques
- To state origins of defects
- To recognise and differentiate between film artefacts and defect indications
- To interpret radiographs and to categories and size the defects
- To meet the syllabus for PCN Level 2
Course Duration :
The minimum required duration of training, which includes both theoretical and practical elements, is:
Entry Requirements (For Examination)
The minimum duration for experience prior to or following success in the qualification examination is:
- Level - not applicable
- Level 2 - 6 months
FOR MORE DETAILS :
Cell : 93810 77677 / 76679 78887
Email : twggroupchennai@gmail.com
CONTACT ADDRESS :
CHENNAI BRANCH
no.5, boopathy street, virugambakkam,
virugambakkam - bus stop opposite chennai , tamil nadu , india.
tel: 044 - 420 77677, 044 - 430 72173
cell : 093845 77677
email : twggroupchennai@gmail.com
KOCHI BRANCH
Near LULU Shopping Mall
Edappally Toll Junction,
Opposite - Metro Bridge Piller No. 387,
V.P Marakkar Building,
V.P Marakkar Road,
Via - Vanitha and Vinitha Theatre
Edappally P.O, Kochi - Kerala
Contact :073580 27788 , 093810 48884,
Email : twggroupcochin@gmail.com ,
Email : twggroupchennai@gmail.com
MUMBAI BRANCH
crescent business square" No.810, kherani road,
opposite - sj studios sakinaka metro
junction, andheri (east) mumbai - 400 059.
cell : 093810 48884, 073580 27788, 093810 77677
email : twggroupmumbai@gmail.com
email : twggroupchennai@gmail.com
TRICHY BRANCH
sri gem plaza no.3, 4th floor,
sankaran pillai street, s.r.c.college road,
chathiram bus stand, trichy - 620 002
Tamil nadu , india.
contact : jenifer : 093845 77677, 93810 77677
contact : suganya : 093825 88890
email : twggroupchennai@gmail.com
COIMBATORE BRANCH
dheepam complex no.574 to 581, 100 feet road,
near g.p.signal, landmark: kalyan jewellery,
gandhipuram, coimbatore - 641 012 tamil nadu , india.
contact : jasmine : 093810 77677, 093845 77677,
contact : sandhiya : 093825 88890
email : twggroupchennai@gmail.com
VIZAG BRANCH
twg group vizag no. 8 - 12 - 1/1,
2nd floor, gayathri nilay, gokul nagar,
karur vysya bank back side opposite - holy cross church,
old gajuwaka junction, vishakapatnam - 530 026.
Andhra pradesh , india.
contact : 073580 27788, 093810 48884, 76692 48884.
email : twggroupchennai@gmail.com
BANGALORE BRANCH
No.54, 15th Main Road ,
2nd Floor,
East of Chord Road
Vijaya Nagar,
Opposite Vijaya Nagar Metro Station,
Bangalore - 560 040.
Karnataka, India.
Contact : 073580 27788 , 093810 77677
Email : twggroupchennai@gmail.com
HYDERABAD BRANCH
twg group hyderabad contact : shopia : 076679 78887 contact : office : 093810 48884
email : twggroupchennai@gmail.com
DELHI BRANCH
twg group delhi contact : shopia : 076679 78887 contact : office : 093810 48884
email : twggroupchennai@gmail.com
PUNE BRANCH
twg group pune contact : shopia : 076679 78887 contact : office : 093810 48884
email : twggroupchennai@gmail.com
TRIVANDRUM BRANCH
twg group trivandrum contact : shopia : 076679 78887 contact : office : 093810 48884
email : twggroupchennai@gmail.com
CALICUT BRANCH
twg group calicut contact : shopia : 076679 78887 contact : office : 093810 48884
email : twggroupchennai@gmail.com
